1/4" ID Double Wire Braid Hydraulic Hose

1/4" Hydraulic Hose Assembly, Double Wire Braid, Female JIC Straight Swivel x Female JIC Straight Swivel, 5800 PSI

1/4" Hydraulic Hose Assembly, Double Wire Braid, Female JIC Straight Swivel x Male NPT Straight, 5800 PSI

1/4" Hydraulic Hose Assembly, Double Wire Braid, Male NPT Straight Swivel x Male NPT Straight, 5800 PSI

1/4" Hydraulic Hose Assembly, Double Wire Braid, Male NPT Straight x Male NPT Straight, 5800 PSI

1/4″ Custom Hydraulic Hose Assembly, Double Wire Braid, 5800 PSI

Hydraulic Hose* Required

Select the hose.

1/4" ID Double Wire Braid Hydraulic Hose - Per Ft
$2.36
In stock

Clear selection

Subtotal:

Fitting – Side 1* Required

Select the fitting for side one of the assembly

Hydraulic Crimp Fittings, Female JIC, 90 Degree, Medium Drop, 1/4"
$7.59
In stock
Hydraulic Crimp Fittings, Female JIC, Straight Swivel, 1/4"
$4.59
In stock
Hydraulic Crimp Fittings, Male NPT, Straight Swivel, 1/4"
$9.47
In stock
Hydraulic Crimp Fittings, Male NPT, Straight, 1/4"
$4.34
In stock

Clear selection

Subtotal:

Fitting – Side 2* Required

Select the fitting for side 2 of the assembly

Hydraulic Crimp Fittings, Female JIC, 90 Degree, Medium Drop, 1/4"
$7.59
In stock
Hydraulic Crimp Fittings, Female JIC, Straight Swivel, 1/4"
$4.59
In stock
Hydraulic Crimp Fittings, Male NPT, Straight Swivel, 1/4"
$9.47
In stock
Hydraulic Crimp Fittings, Male NPT, Straight, 1/4"
$4.34
In stock

Clear selection

Subtotal:

Add-Ons Option Total:
Component Options Total:
Order Total:

The add to cart button is disabled because the following component is not selected:

SKU: CHA-TR2MT-04 Categories: Custom Hydraulic Hose Assemblies, Hydraulic Hose

Description
Additional information

This custom hydraulic hose assembly if built using our double wire braid hydraulic hose provides medium pressure service with tight bends for pressures up to 5800 PSI. This hose is suitable for high temperature petroleum-based hydraulic fluids, hot oil, grease, lubricants and crude oils, air and water.

This hydraulic hose is made up of two high tensile steel wire braids separated by smooth rubber. It has a service temperature range of -40° F to 212° F and supports a 4″ minimum bend radius.

This hose meets or exceeds EN 853 2SN and exceeds SAE 100 R2AT.

For air or gas application above 250 PSI (1.7 Mpa) the cover should be pin-pricked.

1/4″ ID, 5800 PSI Working Pressure Hydraulic Hose
Synthetic rubber hose reinforced with two high tensile strength steel wire braids
Provides medium pressure service with tight bends.
Suitable for high temperature petroleum-based hydraulic fluids, hot oil, grease, lubricants and crude oils, air and water.
Temperature Range: -40° F to 212° F
Choose your length and installed fittings

Weight	12 lbs
Dimensions	10 × 10 × 10 in
Hose Category	Hydraulic Hose
Hose Type	2SN/R2AT Hydraulic Hose
Hose ID	1/4"
Inside Diameter	1/4"
Minimum Bend Radius	4"
Hose Cover	Synthetic Rubber, Black
Hose Tube	Synthetic Rubber, Black
Hose Reinforcement	Double Wire Braids
Working Pressure	5800 PSI
Working Temperature	-40° F to +212° F
USA Content	Assembled In USA
Product Type	Hydraulic Hose

1/4″ Custom Hydraulic Hose Assembly, Double Wire Braid, 5800 PSI

Hydraulic Hose* Required

Fitting – Side 1* Required

Fitting – Side 2* Required

Related products